logo daido machinery corporation JAPANESE HOME
PRODUCTS ABOUT US contact
 

真空ポンプ

DAIDO double way vaccum pump is not neccessary of after use treatment for water or oil, compare to other types of vaccum pumps such as water seal or oil turn. Its strong and firm structure will providing a high durability, even there are some mixture of resin or water inside absorption gas.

■TYPE
　▼ FV series
Type
Water-cooled double-acting horizontally-reciprocating piston pump with plate valves
Ultimate pressure
5065～4000Pa
Displacement
5.0～75m3/min

Type FV-26[37kW]
Performance curves

　▼ HI series
Type
Water-cooled double-acting sing-stage horizontally-reciprocating piston pump with slide valves
Ultimate pressure
800～470Pa
Displacement
2.0～38.4m3/min
Standard accessories
Companion flange(s)
V belt(s)
Foundation bolt(s) and nut(s)		 V pully
Automatic lubricator
Belt cover

Type HI-2[3.7kW]
Performance curves

　▼ HT series
Type
Water-cooled doubled-acting two-stage horizontally-reciprocating piston pump with slide valves
Ultimate pressure
67～9Pa
Displacement
2.0～38.4m3/min
Standard accessories
Companion flange(s)
V belt
Foundation bolt		 V pully
Automatic lubricator
Belt cover

Type HT-4[7.5kW]
Performance curves

■SPECIAL FEATURES

TROUBLE-FREE
Rugged construction and the interchangeability of almost all the parts make maintenance easy

LUBRICATING OIL-FREE
Eccentric rods of HI-2 to 8 and HT-2 to 8 has oil-free construction to cut down running cost

Waist Free
It is not neccessary of after use treatment for water or oil.
Ensure of economical running cost, as well as eco-friendly performance.

ALL IN ONE
HI-2 to 6 and HT-2 to 5 have and electric motor on the body to reduce floor area by 60%.
 
■STANDARD SPECIFICATIONS(FV series)
(1torr≒1.333x102Pa)
Model No Cylinder(mm) Speed
(min-1)		 Displacement
(m3/min)		 Maximum
shaft power
(kW)		 Driving
motor
(kW)		 Ultimate
pressure
(Pa) 		Suction and Discharge Ports(A) Cooling water flow rate(m3/h) Appropriate weight
(kg)
diameter stroke
FV11 250 150 350 5.0 5.6 7.5 5065 80x80 0.4 560
FV12 300 150 350 7.3 8.2 11 4665 80x80 0.6 810
FV13 350 150 350 10.0 11.1 15 4665 100x100 0.8 980
FV20 400 200 320 16.0 17.5 18.5 4665 150x150 1.2 1460
FV23 460 200 320 21.0 22.9 30 4665 150x150 1.5 1700
FV24 500 200 320 24.5 26.5 30 4665 150x150 1.8 2260
FV25 550 200 320 30.0 32.0 37 4665 175x175 2.1 2400
FV26 600 200 300 33.0 35.2 37 4000 200x200 2.4 2580
FV41 800 300 250 75.0 77.2 90 4000 300x300 3.6 4700
HI and HT series. The figures for HT series are shown in parentheses
(1torr≒1.333x102Pa)
Model No Cylinder(mm) Speed
(min-1)		 Displacement
(m3/min)		 Maximum
shaft power
(kW)		 Driving
motor
(kW)		 Ultimate
pressure
(Pa) 		Suction and Discharge Ports(A) Cooling water flow rate(m3/h) Appropriate weight
(kg)
diameter stroke
HI,HT2 200 150 220 2.00 2.4
(3.3)		 3.7
(3.7)		 800
(67)		 65x50 0.2
(0.3)		 580
(690)
HI,HT3 250 150 220 3.14 4.0
(5.0)		 5.5
(5.5)		 800
(67)		 80x65 0.3
(0.4)		 610
(720)
HI,HT4 250 200 200 3.80 4.7
(6.0)		 5.5
(7.5)		 800
(67)		 80x65 0.4
(0.6)		 730
(880)
HI,HT41/2 300 200 180 4.93 6.0
(7.6)		 7.5
(11)		 800
(67)		 100x80 0.5
(0.8)		 800
(1100)
HI,HT5 350 200 180 6.70 7.9
(10.3)		 11
(11)		 800
(67)		 100x80 0.6
(0.9)		 900
(1400)
HI,HT6 350 250 170 7.95 9.3
(12.1)		 11
(15)		 800
(54)		 100x90 0.8
(1.2)		 1040
(1850)
HI,HT8 400 300 170 12.45 14.3
(18.5)		 15
(22)		 670
(13)		 150x100 1.0
(1.5)		 1630
(2290)
HI,HT9 450 300 170 15.75 18.3
(23.5)		 22
(30)		 540
(11)		 150x125 1.2
(1.8)		 2160
(2930)
HI,HT10 460 350 160 18.00 19.8
(30.5)		 22
(37)		 540
(11)		 150x125 1.5
(2.1)		 2400
(3030)
HI,HT11 500 350 160 21.50 24.2
(31.6)		 30
(37)		 470
(11)		 175x125 1.8
(2.4)		 250
(3190)
HI,HT13 600 400 150 32.90 34.0
(47.8)		 37
(55)		 470
(9)		 200x150 2.4
(3.3)		 2970
(3930)
HI,HT14 650 400 150 38.40 44.1
(56.0)		 45
(75)		 470
(9)		 225x200 3.1
(3.9)		 350
(4500)
 
 
 
Copyright 2003 DAIDO MACHINERY CORPRATION. All rights reserved.